AE-1152F Ultra Low Ohm METER
Optimum for the auto measurement of Ultra-low Resistor.
- Available to measure the percent the set reference value :
0.01mΩ~1kΩ/±50.00%【Minimum resolution of 1nΩ】 - Measuring range :0.0000mΩ~1.5000kΩ
- Measurement not to influenced by thermal electro motive force.
- Impressed the measuring current at pulse interval.
- Contact-check is equipped as standard function.
- RS-232C,GP-IB and Centronics output available.【option】
- Comparison result by built-in comparator is open-collector output and
displayed as LO,GO,HI by LED and buzzer. - Measuring current/voltage-check are built-in as standard function.
- Available to shift output.
Measuring range and Accuracy (at 23℃±5℃) :
| Range | Measuring range | Resolution | Measuring current | Accuracy |
|---|---|---|---|---|
| 1mΩ | 0.0000mΩ~1.5000mΩ | 0.1μΩ | 3A | within ±(0.01%rdg +0.3μΩ) ±3digit 【Average】 ±4digit 【Slow】 ±5digit 【Fast】 |
| 10mΩ | 0.000mΩ~15.000mΩ | 1μΩ | 1A | |
| 100mΩ | 0.00mΩ~150.00mΩ | 10μΩ | ||
| 1Ω | 0.0000Ω~1.5000Ω | 100μΩ | 100mA | |
| 10Ω | 0.000Ω~15.000Ω | 1mΩ | ||
| 100Ω | 0.00Ω~150.00Ω | 10mΩ | 10mA | |
| 1KΩ | 0.0000kΩ~1.5000kΩ | 100mΩ | 1mA | |
| % | 0.01mΩ~1.0000kΩ/±50.00% | 0.01%[1nΩ] | Mentioned above | Refer to the instruction manual |
| Voltage at terminals open : | below 5V |
|---|---|
| Measuring method : | 4-terminal measurement with contact check. |
| Measuring time : | 【Free running mode】2~10times/sec. |
| 【Remote start mode】about 9msec~400msec. | |
| Comparator setting range : | mΩ test mode: 0~15000[both for the upper and lower limit] |
| % test mode : 50.00%[low limit:0~-50.00%、high limit:0~+50.00%] | |
| Indication comparator’s comparison result : | LO/GO/HI, LED display and buzzer. |
| Control signal : | input: START “L”[0V]→”H”[DC12V]⇒start |
| HOLD open or ”H”[DC12V]⇒freerun / “L”[0V]⇒hold | |
| output LO/GO/HI, CONT-E and EOC/ open collector[40V/100mA max.] | |
| Operation condition : | 【Temp.】5℃~+40℃、【Humidity】below 85% |
| Outer dimension : | 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】 |
| Weight : | about 3kg |
| Power supply : | AC85V~265V、50~60Hz、about 60VA |
| Option | ・RS-232C | Only one kind of interface can be provided with the checker. |
|---|---|---|
| ・GP-IB | ||
| ・Printer output[Centronics] | ||
| ・Printer Cable | ||
| ・Short termination(Zero ohm standard resistor) | ||
※ We will change the specifications of the catalogue without notice by improvement.











