AE-323A High Speed Type・1kHz Digital Capacitor Checker

Optimum for the use on a taping machine for Film Capacitor and Ceramic Capacitor.

  • Measuring range:10pF~9.99μF/±99.9%
  • 5-Terminal measurement.
  • High speed integration method measurement.
  • Measuring value is displayed in percentage against the reference capacitance value set
    Digitally and comparison result by built-in comparator is displayed as –NG,GO,+NG by LED and buzzer.
  • BCD parallel out available.
  • External DC bias possible(max.DC25V)
Range No. Measuring range Test voltage Accuracy
0 10pF~99.9pF 1V(r.m.s)approx. within±0.25%±0.25p±1digit
1 100pF~999pF
2 1nF~9.99nF
3 10nF~99.9nF
4 100nF~999nF
5 1μF~9.99μF
Measuring method: 5-terminal measuring method、parallel equivalent circuit.
Measuring frequency: 1kHz±0.1%, sine wave form.
Stray capacitance cancel range: 10pF approx.
Measuring time: 【in case of remote start mode】about 3.2msec.
【in case of free running mode】about 68time/sec.
Comparator setting range: Upper limit:0.0%~+99.9%, Lower limit:0.0%~-99.9%
Display of comparison result by comparator: LED display of -NG/GO/+NG, and buzzer.
Comparator setting range: Upper limit : 0.0% ~ +99.9%, Lower limit : 0.0% ~ -99.9%
Display of comparison result by comparator: LED display of -NG/GO/+NG,and buzzer.
Input and output signal: Remote start input:0~+12V or open collector.
Remote start input:0~+12V or open collector.
End of measurement output[EOC]:open collector [max.80V/100mA]
BCD parallel output of measuring value:TTL fan out 2
Operating condition: Temp.:0℃~+50℃、 Humidity:below 85%
Power supply: AC85V~265V、50~60Hz、about 15VA
Outer dimension: 250(W)×89(H)×250(D)mm(excluding protruding parts such as rubber legs, etc.)
Weight: 2kg approx.

※ We will change the specifications of the catalogue without notice by improvement.

Copyright(c) 2014 AEMIC CORPORATION All Rights Reserved.