AE-1152D_11C DC Low Ohm METER
Optimum for the automatic measurement of super low-resistance resistor.Select the result of judgment by maximum 11 classifications with BIN function.
- Optimum for super low-resistance resistor etc. of shunt resistor.
- Cancelling the influence of thermal electromotive force.
- Impressed the pulse measurement current to reduce self-heating and the abrasion of measurement terminal.
- Contact-check is equipped as standard function.
- The measurement of the absolute value :0.0000mΩ～1.5000kΩ
- %measurement :0.1mΩ～1kΩ/±50.00%【The minimum resolution 10nΩ】
- GP-IB/RS-232C/Centronics interface.【optional】
- BIN function[BIN1～BIN9]【Available for maximum 11 classifications】Available for open-collector output,LED display and buzzer.
- Equipped with check circuit as standard function to find out whether the measurement current/measurement voltage is abnormal.
- Available for shift output.
Measuring range and Accuracy (at 23℃±5℃):
| Range | Measuring range | Resolution | Measuring current | Accuracy |
|---|---|---|---|---|
| 1mΩ | 0.0000mΩ～1.5000mΩ | 0.1μΩ | 3A | within ±(0.01％rdg +1μΩ) ±3digit 【Average】 ±4digit 【Slow】 ±5digit 【Fast】 |
| 10mΩ | 0.000mΩ～15.000mΩ | 1μΩ | 1A | |
| 100mΩ | 0.00mΩ～150.00mΩ | 10μΩ | ||
| 1Ω | 0.0000Ω～1.5000Ω | 100μΩ | 100mA | |
| 10Ω | 0.000Ω～15.000Ω | 1mΩ | ||
| 100Ω | 0.00Ω～150.00Ω | 10mΩ | 10mA | |
| 1KΩ | 0.0000kΩ～1.5000kΩ | 100mΩ | 1mA | |
| ％ | 0.1mΩ～1kΩ/±50.00％ | 0.01％[10nΩ] | Refer below | Refer to the instruction manual |
| Voltage at terminals open : | below 5V. |
|---|---|
| Measuring method : | 4-terminal measurement[Available for contact -check.] |
| Measuring time : | 【Free running mode】2～10times/sec. |
| 【External start mode】about 9msec～400msec. | |
| Comparator setting range : | [0～15000][ for both the upper and lower limit、％range：low 0～-50%、high 0～+50% |
| Indication comparator’s comparison result : | [BIN1～BIN9] display and buzzer. |
| Control signal : | Start：”L”[0V]→”H”[DC12V] |
| Hold：Open and H”[DC12V]:Free run、”L”[0V]:Hold | |
| Signal of judgment result [LO/GO(BIN1～BIN9)/H1] ：open collect output max40V、100mA |
|
| Contact error[CONT-E]： open collect output max40V、100mA | |
| completion signal [EOC]：open collect output max40V、100mA[40V/100mA max.] | |
| Operation condition : | Temperature：5℃～+40℃、 Humanity：Below 85% |
| Outer dimension : | 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】 |
| Weight : | about 3kg |
| Power supply : | AC85V～265V、50～60Hz、about 60VA |
| Option | ・RS-232C | Only one kind of interface can be provided with the checker. |
|---|---|---|
| ・GP-IB | ||
| ・Printer output[Centronics] | ||
| ・Printer Cable | ||
| ・Short termination(Zero ohm standard resistor) | ||
※ We will change the specifications of the catalogue without notice by improvement.
