AE-1652E Wide range, High speed and High accuracy Digital resistance checker
A wide range from low resistor to high resistor measurement is achieved by the highly precise and wonderful speed
Optimum for the on a sorting machine,taping machine and painting conveyor
For chip MELF and lead typs resistor of B,C,D,F,G,K and M class
- Ultra high accuracy and high stability by the measuring method rejected thermoelectromotive force.
- High stability by the improvement of noise immunity for the isolated circuit
between analog and digital part. - Available to make the high speed and ultra-high stable measurement by the setting
function of average time on measureing value for each range. - Range of measurement for absolute value : 0.000mΩ ～ 125.00MΩ
for % : -9.999% ～ +2.5000% / -99.99% ～ +25.00% - Available to select the function for contact check “before measurement”,
“after measurement” or “non-contact check” - 【New functions】Contact check function while measurements. (Always)
※Available to improve reliable measurement. - RS-232C and Centronics interface are built-in as standard equipment.【GP-IB is option】
- Transfer function of setting date is built-in as standard equipment.
(Available to transfer the same setting data to another set of AE-1652E) - The checking circuit of the abnormal measuring current and voltage is built-in.
Measurning range and Accuracy（at 23℃±5℃）、90days after colibration 【1year after calibration:2times】
| Range | Standerd setting range | Test Current | Accuracy | |||
|---|---|---|---|---|---|---|
| SLOW[Hi-Reso.] | FAST[Hi-Reso.] | Additional error1 | Additional error2 | |||
| 10mΩ | 0.500mΩ～10.900mΩ | 1A | Whith in±0.010％±4×β±10ｄ | ±0.010％±4×β±15ｄ±[4/(1+n)]d | ±(40×γ) | - |
| 100mΩ | 5.00mΩ～109.00mΩ | 1A *100mA |
Whith in±0.010%±β±5d | Whith in±0.010%±2×β± 10d±[4/(1+n)]d |
±(4×γ) | ±15×(β+2×γ) |
| 1Ω | 0.0500Ω～1.0900Ω | 100mA *10mA |
Whith in±0.010%±β±5d | Whith in±0.010%±β±10d± [2/(1+n)]d |
±6×(β+3×γ) | |
| 10Ω | 0.500Ω～10.900Ω | 50mA *5mA |
- | ±5×(β＋γ) | ||
| 100Ω | 5.00Ω～109.00Ω | 10mA *5mA |
Whith in±0.010%± β2d | Whith in±0.010%±β±10±[1/(1+n)]d | - | |
| 1kΩ | 0.0500ｋΩ～1.090kΩ | 5mA | - | - | ||
| 10kΩ | 0.500kΩ～10.900kΩ | 0.5mA | - | - | ||
| 100kΩ | 5.00kΩ～109.00kΩ | 50μA | - | - | ||
| 1MΩ | 0.0500MΩ～1.0900MΩ | 5μA | Whith in±0.025%±β10d±[1/(1+n)]d | - | - | |
| 10MΩ | Whith in±0.02%±β±10d | 0.5μA | ±0.02%±β±10d以内 | ±0.1％±β±20ｄ±[1/(1+n)]d以内 | - | - |
| 100MΩ | 5.00MΩ～109.00MΩ | 0.05μA | Whith in±0.1%±β±20d | - | - | - |
d:digits n:program[12]measurement time(msec) in case of absolute varue: apply to LO-Reso(add to ±1d) *Program[18]In case of Lo current mode is ON
in case of %value:α=(100/standerd setting value 10mΩ)×0.01%, α=0
β=(range//standerd setting valu)×0.001% γ=(β/average setting value)program [17]average count
| Measurement time | external start | Free running | ||
|---|---|---|---|---|
| SLOW | FAST | SLOW | FAST | |
| about 17sec.～36msec | about 0.7msec.～23msec. | about30count/sec ～ about 5count/sec | About 60 count/sec～about 10 count/sec | |
| Test terminalopen voltage | below 15V |
|---|---|
| EOC[Endofcomparison]pulsewidth | 1～250msec. or continuative |
| Measuring method | 2 or 4 terminal measurement |
| Comparator set range | ％ range：±9.999% ／ -99.99%～+25.00％ Absolute value：00000～12500 |
| Operation condition | temperature：0℃～+50℃、 humidity：80%below |
| Power supply | AC85V～265V、50～60Hz、about 50VA |
| Outer dimension | 333(W)×99(H)×300(D)mm（excluding protruding parts such as rubber legs, etc） |
| Weight | About 3.6kg |
| OPTION | ・GP-IB |
|---|---|
| ・Data cable | |
| ・Short termination(Zero ohm standard resistor) |
※ We will change the specifications of the catalogue without notice by improvement.
