AE-1644E Ultra High resistance checker (Equipped trimming mode)
Perfect for equipping sorting machine of ultra-high resistance eg. 10kΩ ~ 1TΩ chip, MELF, and axial type and trimming machine of both laser and cutting type
- A high-speed integration system with little errors against a noise.
【Available to make the integral time setting for each range.】 - ％ measurement is possible by digital setting of the standard resistance value.
- Trimming mode is possible.
- Contact-check is equipped as standard function.
- Comparison result by built-in comparator is open-collector output and displayed as
LO,GO,HI by LED and buzzer. - RS-232C interface as standard.【Option: GP-IB】
Measuring range and Accuracy（at 23℃±5℃）
| Range | Measuring range | Accuracy | |||
|---|---|---|---|---|---|
| Test Voltage H | Test Voltage L | ||||
| 100kΩ | 5.00kΩ～150.00kΩ | 15V | ±0.03％±1digit[±0.1％ of rdg±1digit] | 15V | ±0.03％±1digit[±0.1％ of rdg±1digit] |
| 1MΩ | 50.0kΩ～1500.0kΩ | ||||
| 10MΩ | 0.500MΩ～15.000MΩ | ||||
| 100MΩ | 5.00MΩ～150.00MΩ | 100V | ±0.05％±1digit[±0.2％ of rdg±1digit] | 15V | ±0.3％±1digit[±1.2％ of rdg±1digit] |
| 1GΩ | 50.0MkΩ～1500.0MΩ | ||||
| 10GΩ | 0.500GΩ～15.000GΩ | 100V | ±0.2％±1digit[±0.5％ of rdg±1digit] | 15V | ±1.2％±2digit[±1.5％ of rdg±1digit] |
| 100GΩ | 5.00GΩ～150.00GΩ | 200V | ±0.5％±2digit[±0.8％ of rdg±2digit] | 15V | ±1.5％±2digit[±2.0％ of rdg±2digit] |
| 1TΩ | 50.00GΩ～1500.0GΩ | 200V | ±0.1％±4digit[±1.5％ of rdg±4digit] | It’s impossible to choose | |
| Measuring Indication Range: | %-Measurement：±50.00% |
|---|---|
| OHM-Measurement：500～15000 | |
| Measuring Method: | Constant voltage measurement[Abailable”CONTACT CHECK”] |
| Measuring Time: | 【Free running】 ： About 3.3～4ime/sec. |
| [External start] FAST:2.5msec.+DELAY+Integration time[1msec.～29msec.] | |
| SLOW:2.5msec.+DELAY+Integration time+[Power frequency 1 cycle×(1～9)] | |
| [Trimming mode] About 14.5msec.+DELAY+Integration time+[150mesc.](In case of “HI” only) | |
| Comparator: | %-Measurement：±50.00% both for high and low limit. |
| OHM-Measurement：500～15000 both for high and low limit. | |
| Control Signal: | START：”L”[0V]→”H”[DC12V]⇒start |
| HOLD：Open or ”H”[DC12V]⇒free run / ”L”[0V]⇒hold | |
| OUTPUT:[LO/GO/HI],[CE]and [EOC]：open collector max40V、100mA | |
| Operation Condition: | Temp.：5℃～+50℃、 Humidity：below 80% |
| Power Supply: | AC85V～265V、50～60Hz、about 20VA |
| Outer Dimension: | 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】 |
| Weight: | About 2.5kg |
| Option | ・GP-IB |
|---|---|
| ・Printer Cable | |
| ・Short termination (Zero ohm standard resistor) |
※ We will change the specifications of the catalogue without notice by improvement.
