AE-1136D Digital Thermistor Checker

7 Rank sorting By Comparison With External Standard.

  • Available to make % measurement against standard value at room temperature regardless of temperature characteristic in comparison with external standard-thermistor.
  • Possible to reduce error of the measured value for Self-heating on the measuring object by pulse impress of low measuring power【Within 150μW】
  • Measurement not influenced by thermal electro motive force.
  • Impressed the measuring current at pulse interval, in order to reduce abrasion.of measuring terminal.
  • Available to measure the resistance value of external standard or to measure the resistance value of the measuring object.
  • Available to calibrate the difference【±9.999%】 on resistance value of external standard and to correctly measure the measuring object.
  • Contact-check is equipped as standard function.
  • Measuring range :1Ω~5MΩ/±50.00%
  • RS-232C,GP-IB and Centronics output available.【option】
  • Comparison result by built-in comparator is open-collector output and displayed as LO,GO,HI by LED and buzzer.
  • Measuring current/voltage-check are built-in as standard function.
Measuring range and Accuracy(at 23℃±5℃)
Range Measuring range Resolution Test Current Accuracy Display
10Ω 0.000Ω~15.000Ω 1mΩ 3mA within±0.03%±2digit[Slow]/within 5digit[Fast] 15000
100Ω 0.00Ω~150.00Ω 10mΩ 1mA
1kΩ 0.0000kΩ~1.5000kΩ 100mΩ 300μA within ±0.02%±2digit[Slow]
10kΩ 0.000kΩ~15.000kΩ 100μA /within 5digit[Fast]
100kΩ 0.00kΩ~150.00kΩ 10Ω 10μA
1MΩ 0.0000MΩ~1.5000MΩ 100Ω 1μA within ±0.02%±3digit[Slow]
/within 6digit[Fast]
5MΩ 0.000MΩ~5.000MΩ 1kΩ 1μA within ±0.02%±5digit[Slow]
/within 10digit[Fast]
500
1Ω~5MΩ 0.01% -ditto- Refer to the instruction manual ±50.00%
Voltage at terminals open : below 9V
Measuring method : 4-terminal measurement.
Scanning of Rs/Rx,
Available to make contact-check of Rs and Rx.
Measuring time : 【Free running mode】10 times/sec.[Fast],5 times/sec.[Slow]
【Remote start mode】about 7msec.[Fast] , 23~27msec.[Slow](Difference by range and mode.)
Comparator setting range : Rs/Rx test mode: 0~15000[both for the upper and lower limit]
% test mode : ±50.0%[both for the upper and lower limit]
Indication comparator’s comparison result : LO/GO/HI, LED display and buzzer.
Control signal : input: START “L”[0V]→”H”[DC12V]⇒start
HOLD open or ”H”[DC12V]⇒freerun / “L”[0V]⇒hold
output LO/GO/HI, CONT-E and EOC/ open collector[40V/100mA max.]
Operation condition : 【Temp.】5℃~+40℃、【Humidity】below 85%
Outer dimension : 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】
Weight : about 2.6kg
Power supply : AC85V~265V、50~60Hz、about 60VA
Option ・RS-232C Only one kind of interface can be provided with the checker.
・GP-IB
・ Printer output[Centronics]
・Printer Cable

※ We will change the specifications of the catalogue without notice by improvement.

Copyright(c) 2014 AEMIC CORPORATION All Rights Reserved.