AE-9303B(20CH) Ultra-High Speed Network Resistance Checker
Optimum for on a sorting machine and taping machine for network resistor and chip array resistor.
- Ultra-High Speed：about 1msec per point【including Contact Check】
- Contact Check：Contact error is not output in case of ＜100Ω and available to normally measure.
- Measuring range：0.01Ω～10MΩ
- 4Terminal Measurement【0～less than 99.9kΩ】
2Terminal Measurement【More than 100kΩ】 - Available to make Short Check.
- GO/NG by Built-in Digital Comparator.
- Available to make Tracking check.
- Measuring of different value network resistance and different deviation value are possible.
- RS-232C/GP-IB interface.【Option】
Measuring range and Accuracy（at 23℃±5℃）
| Measuring Range | Test Current | Accuracy | |||
|---|---|---|---|---|---|
| SLOW[±9.99％] | FAST[±9.99％] | SLOW[±99.9％] | FAST[±99.9％] | ||
| 0.01Ω~1Ω | 100mA | within α±0.03％±1d | within α±0.05％±2d | within α±0.1％±1d | within α±0.2％±2d |
| 1.01Ω~10Ω | 50mA | within±0.03%±1d | within ±0.05％±n2d | within ±0.1％±1d | within±0.2%±1d |
| 10.1Ω~100Ω | 5mA | ||||
| 101Ω~1kΩ | 5mA | ||||
| 1.01kΩ~10kΩ | 0.5mA | ||||
| 10.1kΩ~100kΩ | 50μA | ||||
| 101kΩ~1MΩ | 5μA | within ±0.1％±2d | |||
| 1.01MΩ~10MΩ | 0.5μA | within ±0.1％±1d | —- | —- | |
| mΩ CHECK(0~999mΩ) | 50mA | within ±0.2％±2d | within ±0.3％±2d | within ±0.2％±2d | within ±0.3％±2d |
※n：FAST2=1, FAST1=2, d : digits n : Averaging time(msec.), α=±0.1×100/setting value(mΩ) ,
※The above accuracy is dynamic accuracy through scanner.
※The above accuracy is dynamic accuracy through scanner.
| Measuring method: | Less than 99.9kΩ/4 terminals, More than 100kΩ/2 terminals or 4 terminals. |
|---|---|
| Setting range of tracking judging for resistance measurement: | ±9.99% Measuring[±9.99% for both upper and lower limit] |
| ±99.9% Measuring[±99.9% for both upper and lower limit] | |
| Setting range of tracking judging value: | 0.01%～9.99%[judging function：Available ON/OFF] |
| Resistance element number to be able to measure: | Common type：9 elements / Independent type：5 elements[Option：Available to have 19 elements and 10 elements] |
| Measuring time: | Common type：[8 elements：less than 10kΩ] Fast-1：about 8msec.[including Time of Contact Check] |
| Independent type：[4 elements：less than 10kΩ] Fast-1：about 5msec.[including Time of Contact Check and Short Check] | |
| Check function: | Contact-Check：Check is made if the measuring terminal is good condition for measurement [In case of 4 terminal measurement] |
| Short-Check：Check is made the insulation between adjoining pins. | |
| Open-Check：Check is made Open between the designated pins after the measurement. | |
| Operation condition: | 【Temp.】+5℃～+40℃、【Humidity】below 70% |
| Power supply: | AC85V～265V、50～60Hz、about 50VA |
| Outer dimension: | 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】 |
| Weight: | about 4.5kg |
| ・AE-9303B(10 Channels：Standard Type) |
| ・AE-9303B(20 Channels：Special Type) |
| ・RS-232C Interface( Option) |
| ・GP-IB Interface( Option) |
| ・Short termination(Zero ohm standard resistor) |
※ We will change the specifications of the catalogue without notice by improvement.
