AE-1154D Low Ohm Trimming Meter
Perfect for equipping trimming machine of laser type and cutting type both used in trimming process of ultra-Low resistance
- Auto correcting function of trimming value.
- Measurement not to influenced by thermal electro motive force.
- Impressed the measuring current at pulse interval,
in order to reduce abrasion of measuring terminal. - Contact-check is equipped as standard function.
- Measuring range :0.0000mΩ～1.5000kΩ
- Available to measure the percent the set reference value :
0.1mΩ～1kΩ/-99.99%～+50.00%【Minimum resolution of 10nΩ】 - RS-232C and GP-IB【option】
- Comparison result by built-in comparator is open-collector output and
displayed as LO,GO,HI by LED and buzzer. - Measuring current-check are built-in as standard function.
Measuring range and Accuracy (at 23℃±5℃) :
| Range | Measuring range | Resolution | Measuring current | Accuracy |
|---|---|---|---|---|
| 1mΩ | 0.0000mΩ～1.5000mΩ | 0.1μΩ | 1A | within ±(0.01％rdg +1μΩ) ±3digit 【Average】 ±4digit 【Slow】 ±5digit 【Fast】 |
| 10mΩ | 0.000mΩ～15.000mΩ | 1μΩ | ||
| 100mΩ | 0.00mΩ～150.00mΩ | 10μΩ | 300mA | |
| 1Ω | 0.0000Ω～1.5000Ω | 100μΩ | 100mA | |
| 10Ω | 0.000Ω～15.000Ω | 1mΩ | ||
| 100Ω | 0.00Ω～150.00Ω | 10mΩ | 10mA | |
| 1KΩ | 0.0000kΩ～1.5000kΩ | 100mΩ | 1mA | |
| ％ | 0.1mΩ～1.0000kΩ/-99.99%～+50.00％ | 0.01％[10nΩ] | Mentioned above | Refer to the instruction manual |
| Voltage at terminals open : | below 9V |
|---|---|
| Measuring method : | 4-terminal measurement with contact check. |
| Measuring time : | 【Free running mode】2～10times/sec. |
| 【Remote start mode】about 9msec～400msec. | |
| 【Trimming mode】1msec.～100msec. | |
| Comparator setting range : | mΩ test mode: 0～15000[both for the upper and lower limit] |
| % test mode : -99.99～+50.00%[both for the upper and lower limit] | |
| Indication comparator’s comparison result : | LO/GO/HI, LED display and buzzer. |
| Control signal: | Input : Remote start Remote trimming start |
| Output: Trimming speed mode Trimming-NG Trimming-End Contact-Error End of comparison |
|
| Operation condition : | 【Temp.】5℃～+40℃、【Humidity】below 85% |
| Outer dimension : | 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】 |
| Weight : | about 3kg |
| Power supply : | AC85V～265V、50～60Hz、about 60VA |
| Option | ・RS-232C | Only one kind of interface can be provided with the checker. |
|---|---|---|
| ・GP-IB | ||
| ・Short termination(Zero ohm standard resistor) | ||
※ We will change the specifications of the catalogue without notice by improvement.
