AE-162D Ultra-high Speed and High Accuracy, Key Switch Type Digital Resistance Checker
Optimum for the on a sorting machine, taping machine and painting conveyor for chip.
MELF and lead type resistor of D,F,G,J,K and M class.
- High stability by the improvement of noise immunity for the isolated circuit between
analog circuit and digital circuit.
- This device is corresond to the minimum chip.（Low measurement power force）
- Ultra-high speed : 0.7msec.【TYP】
- High accuracy and high stability by the measuring method rejected thermoelectromotiv force.
- High stability by the improvement of noise immunity.
- Available to make the ultra-high speed and stable measurement by the setting function of average on measuring value for each range.
- Range of measurement for absolute value : 0.00mΩ～200.00MΩ
for % : 5mΩ～109MΩ【±99.99%】
- Available to select the function for contact check before or after the measurement
or function of non-contact check.
- RS-232C and Centronics interface are built-in as standard equipment.【GP-IB is option】
- Transfer function of setting data is built-in as standard equipment.
(Available to transfer the same setting data to another set of AE-162D)
- The checking circuit of the abnormal measuring current and voltage is built-in.
ccuracy（at 23℃±5℃）、180days after calibration【1year after calibration : 2times】
| Range |
Measuring Range |
Test Current |
Accuracy*＊ |
| SLOW |
FAST |
| 100mΩ |
5mΩ～100mΩ |
100mA |
within ±0.02％±2a±2d |
within ±0.03％±3a±2d±[2/(1+n)]d 以内 |
| 1Ω |
100.1mΩ～1Ω |
100mA |
within ±0.02％±a±1d |
within ±0.02％±a±2d±[2/(1+n)]d |
| 10Ω |
1.001Ω～10Ω |
50mA |
| 100Ω |
10.01Ω～100Ω |
10mA |
within ±0.02％±1d |
within ±0.02％±2d±[1/(1+n)]d |
| 1kΩ |
100.1Ω～1kΩ |
5mA |
| 10kΩ |
1.001kΩ～10kΩ |
0.5mA |
| 100kΩ |
10.01kΩ～100kΩ |
50μA |
| 1MΩ |
100.1kΩ～1MΩ |
5μA |
within ±0.05％±2d±[1/(1+n)]d |
| 10MΩ |
1.001MΩ～10MΩ |
0.5μA |
within ±0.03％±1d |
within ±0.2％±4d±[1/(1+n)]d |
| 100MΩ |
10.01MΩ～109MΩ |
0.05μA |
within ±0.1％±2d |
─── |
d : digit n : Averaging time(msec.), α=[100/setting value(mΩ)]×0.01% , In case of the measurement of absolute value, add±１digit,
＊The above accuracy is under the condition shielded completely.
| Measuring time |
Remote start |
Free running |
| SLOW |
FAST |
SLOW |
FAST |
| About 18msec.～400msec. |
About 0.7msec.～400msec. |
About 30times/sec.～
About 2times/sec. |
About 60times/sec.～
About 2times/sec. |
| Test terminal open voltage |
below 15V |
| EOC[End of comparison]pulse width |
1～250msec. or continuative |
| Measuring method |
2 or 4 terminal measurement |
| Comparator set range |
4 1/2 digit(20000) both for high and low limit / ％range：±99.99% |
| Operation condition |
Temp.：0℃～+50℃、 Humidity：below 80% |
| Power supply |
AC85V～265V、50～60Hz、about 50VA |
| Outer dimension |
333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】 |
| Weight |
about 3.5kg |
| Option |
・GP-IB |
| ・Data cable |
・ Data cable
・ Short termination(Zero ohm standard resistor) |
※ We will change the specifications of the catalogue without notice by improvement.
