AE-1152D DC Low Ohm METER

Optimum for the auto measurement of Ultra-low Resistor.

  • Measurement not to influenced by thermal electro motive force.
  • Impressed the measuring current at pulse interval.
  • Contact-check is equipped as standard function.
  • Measuring range :0.0000mΩ~1.5000kΩ
  • Available to measure the percent the set reference value :
    0.1mΩ~1kΩ/±50.00%【Minimum resolution of 10nΩ】
  • RS-232C,GP-IB and Centronics output available.【option】
  • Comparison result by built-in comparator is open-collector output
    and displayed as LO,GO,HI by LED and buzzer.
  • Measuring current/voltage-check are built-in as standard function.
  • Available to shift output.
Measuring range and Accuracy (at 23℃±5℃):
Range Measuring range Resolution Measuring current Accuracy
1mΩ 0.0000mΩ~1.5000mΩ 0.1μΩ 3A within
±(0.01%rdg +1μΩ)
±3digit 【Average】
±4digit 【Slow】
±5digit 【Fast】
10mΩ 0.000mΩ~15.000mΩ 1μΩ 1A
100mΩ 0.00mΩ~150.00mΩ 10μΩ
0.0000Ω~1.5000Ω 100μΩ 100mA
10Ω 0.000Ω~15.000Ω 1mΩ
100Ω 0.00Ω~150.00Ω 10mΩ 10mA
1KΩ 0.0000kΩ~1.5000kΩ 100mΩ 1mA
0.1mΩ~1.0000kΩ/±50.00% 0.01%[10nΩ] Mentioned above Refer to the instruction manual
Voltage at terminals open : below 5V.
Measuring method : 4-terminal measurement with contact check.
Measuring time : 【Free running mode】2~10times/sec.
【Remote start mode】about 9msec~400msec.
Comparator setting range : mΩ test mode: 0~15000[both for the upper and lower limit]
% test mode : 50.00%[low limit:0~-50.00%、high limit:0~+50.00%]
Indication comparator’s comparison result : LO/GO/HI, LED display and buzzer.
Control signal : input: START “L”[0V]→”H”[DC12V]⇒start
HOLD open or ”H”[DC12V]⇒freerun / “L”[0V]⇒hold
output LO/GO/HI, CONT-E and EOC/ open collector[40V/100mA max.]
Operation condition : 【Temp.】5℃~+40℃、【Humidity】below 85%
Outer dimension : 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】
Weight : about 3kg
Power supply : AC85V~265V、50~60Hz、about 60VA
Option ・RS-232C Only one kind of interface can be provided with the checker.
・Printer output[Centronics]
・Printer Cable
・Short termination(Zero ohm standard resistor)

※ We will change the specifications of the catalogue without notice by improvement.

Copyright(c) 2014 AEMIC CORPORATION All Rights Reserved.