AE-162L Ultra-high Speed and Hige Accuracy, Key Switch Type Digital Resistance Checker

Optimum for the on a sorting machine and taping machine for ultra small size(0201.03015) chip resistor of D,F,G,J,K and M class.

  • This device is correspond to the ultra small size chip resistor.(Less than 20mW)
  • Available to measuring-probe self cleaning.
  • Ultra-high speed : 0.7msec.【TYP】
  • High accuracy and high stability by the measuring method rejected thermoelectromotiv force.
  • High stability by the improvement of noise immunity.
  • Available to make the ultra-high speed and stable measurement by the setting function of average on measuring value for each range.
  • Range of measurement for absolute value : 0.00mΩ~125.00MΩ
    for % : 5mΩ~109MΩ【-99.99%~+25.00%】
  • Available to select the function for contact check before or after the measurement or function of non-contact check.
  • RS-232C and Centronics interface are built-in as standard equipment.【GP-IB is option】
  • Transfer function of setting data is built-in as standard equipment.
    (Available to transfer the same setting data to another set of AE-162L)
  • The checking circuit of the abnormal measuring current and voltage is built-in.
Measuring range and Accuracy(at 23℃±5℃)、180days after calibration【1year after calibration : 2times】
Range Measuring Range Test Current Accuracy
100mΩ 5mΩ~100mΩ 100mA within ±0.02%±2a±2d within ±0.03%±3a±2d±[2/(1+n)]d
100.1mΩ~1Ω 100mA
10Ω 1.001Ω~10Ω 30mA within ±0.02%±β±1d within ±0.02%±β±2d±[2/(1+n)]d
100Ω 10.01Ω~100Ω 10mA within ±0.02%±1d within ±0.02%±2d±[1/(1+n)]d
1kΩ 100.1Ω~1kΩ 3mA
10kΩ 1.001kΩ~10kΩ 0.5mA
100kΩ 10.01kΩ~100kΩ 50μA
1MΩ 100.1kΩ~1MΩ 5μA within ±0.05%±2d±[1/(1+n)]d
10MΩ 1.001MΩ~10MΩ 0.5μA within ±0.03%±1d within ±0.2%±4d±[1/(1+n)]d
100MΩ 10.01MΩ~109MΩ 0.05μA within ±0.1%±2d ───
d : digit n : Averaging time(msec.),
α=[100/setting value(mΩ)]×0.01% , In case of the measurement of absolute value, α=0(add±1d),
*The above accuracy is under the condition shielded completely. 
Measuring time Remote start Free running
about 18msec.~400msec. about 0.7msec.~400msec. about 30times/sec.~
about 2times/sec.
about 60times/sec.~
about 2times/sec.
Measuring power below 0.02W
Test terminal open voltage below 9V
EOC[End of comparison]pulse width 1~250msec. or continuative
Measuring method 2 or 4 terminal measurement
Comparator set range 00000~12500/ %range:-99.99%~+25.00%
Operation condition Temp.:0℃~+50℃、 Humidity:below 80%
Power supply AC85V ~ 265V、50Hz ~ 60Hz、about 50VA
Outer dimension 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】
Weight about 3.5kg
Option ・GP-IB
・Data cable
・ Short termination(Zero ohm standard resistor)

※ We will change the specifications of the catalogue without notice by improvement.

Copyright(c) 2014 AEMIC CORPORATION All Rights Reserved.