AE-1152D_11C DC Low Ohm METER

Optimum for the automatic measurement of super low-resistance resistor.
Select the result of judgment by maximum 11 classifications with BIN function.

  • Optimum for super low-resistance resistor etc. of shunt resistor.
  • Cancelling the influence of thermal electromotive force.
  • Impressed the pulse measurement current to reduce self-heating and the abrasion of measurement terminal.
  • Contact-check is equipped as standard function.
  • The measurement of the absolute value :0.0000mΩ~1.5000kΩ
  • %measurement :0.1mΩ~1kΩ/±50.00%【The minimum resolution 10nΩ】
  • GP-IB/RS-232C/Centronics interface.【optional】
  • BIN function[BIN1~BIN9]【Available for maximum 11 classifications】Available for open-collector output,LED display and buzzer.
  • Equipped with check circuit as standard function to find out whether the measurement current/measurement voltage is abnormal.
  • Available for shift output.
Measuring range and Accuracy (at 23℃±5℃):
Range Measuring range Resolution Measuring current Accuracy
1mΩ 0.0000mΩ~1.5000mΩ 0.1μΩ 3A within
±(0.01%rdg +1μΩ)
±3digit 【Average】
±4digit 【Slow】
±5digit 【Fast】
10mΩ 0.000mΩ~15.000mΩ 1μΩ 1A
100mΩ 0.00mΩ~150.00mΩ 10μΩ
0.0000Ω~1.5000Ω 100μΩ 100mA
10Ω 0.000Ω~15.000Ω 1mΩ
100Ω 0.00Ω~150.00Ω 10mΩ 10mA
1KΩ 0.0000kΩ~1.5000kΩ 100mΩ 1mA
0.1mΩ~1kΩ/±50.00% 0.01%[10nΩ] Refer below Refer to the instruction manual
Voltage at terminals open : below 5V.
Measuring method : 4-terminal measurement[Available for contact -check.]
Measuring time : 【Free running mode】2~10times/sec.
【External start mode】about 9msec~400msec.
Comparator setting range : [0~15000][ for both the upper and lower limit、%range:low 0~-50%、high 0~+50%
Indication comparator’s comparison result : [BIN1~BIN9] display and buzzer.
Control signal : Start:”L”[0V]→”H”[DC12V]
Hold:Open and H”[DC12V]:Free run、”L”[0V]:Hold
Signal of judgment result [LO/GO(BIN1~BIN9)/H1]
:open collect output max40V、100mA
Contact error[CONT-E]: open collect output max40V、100mA
completion signal [EOC]:open collect output max40V、100mA[40V/100mA max.]
Operation condition : Temperature:5℃~+40℃、 Humanity:Below 85%
Outer dimension : 333(W)×99(H)×300(D)mm【excluding protruding parts such as rubber legs, etc.】
Weight : about 3kg
Power supply : AC85V~265V、50~60Hz、about 60VA
Option ・RS-232C Only one kind of interface can be provided with the checker.
・Printer output[Centronics]
・Printer Cable
・Short termination(Zero ohm standard resistor)

※ We will change the specifications of the catalogue without notice by improvement.

Copyright(c) 2014 AEMIC CORPORATION All Rights Reserved.